Purity 99% · CAS 7439-93-2 · Li
Lithium Metal 99% — metallurgical grade
Alloying, metallurgical additions
Overview
Technical-grade lithium ingot for aluminium and magnesium alloying, where sodium and potassium residues are acceptable. Shipped under oil or argon as UN1415 (lithium metal), a class 4.3 dangerous good.
Typical trace impurities
| Impurity | Typical max |
|---|---|
| Na | ≤ 0.5% |
| K | ≤ 0.1% |
| N | ≤ 0.1% |
Indicative values. The certificate of analysis for your lot is the binding document.
Where this grade is used
- ▪Aluminium–lithium alloy producers
- ▪Magnesium alloy foundries
- ▪Glass and ceramic fluxing
Common forms
Ingot, granules
Specification at a glance
| Material | Lithium (Li) |
|---|---|
| Purity | 99% (2N), metals basis |
| CAS | 7439-93-2 |
| Production route | Molten-salt electrolysis of lithium chloride, argon-packed |
| Available forms | Ingot, granules |
| Analysis method | ICP-OES assay plus oxygen determination |
| Documentation | Certificate of analysis per lot, RoHS and REACH statements, country of origin |
| Typical packaging | Argon pouch · Sealed tin under oil · Drum (DG compliant) |
What 99% (2N) actually means
2N is shorthand for 99% purity on a metals basis: at most 1% of the material, by weight, is something other than Li. The metals-basis convention excludes dissolved gases and, for powders, surface oxygen — which is why oxygen is quoted separately in the trace table below.
Two lots at the same nominal purity are not interchangeable if the residual elements differ. For this grade the limiting element is typically Na at ≤ 0.5%. What matters is which impurities your process is sensitive to — judge a lot on its full trace analysis, not on the headline number.
Choosing 2N versus the neighbouring grades
Going up to 99.9% (3N) is worth it when battery-grade metal, foil and salts describes your application; expect a materially higher cost per kilo and scarcer availability for a difference few processes can detect otherwise.
When in doubt, qualify both adjacent grades on a sample and run your own incoming inspection before committing a process to either.
Quality control and traceability
Lithium at 99% is normally released against a lot-specific certificate of analysis stating the assay, the trace elements measured and the method used (ICP-OES assay plus oxygen determination). Well-run lots stay traceable from the refinery batch through to the container that reaches the laboratory.
- ▪A retained sample per lot, so a later question can be re-tested against the original material
- ▪Independent third-party verification, used when the assay is contractually critical
- ▪Incoming inspection on the receiving side — the certificate states the method, not the result you will measure
Handling, storage and shipping
- ▪Lithium metal reacts with moisture and nitrogen in air — handle in an argon glovebox below 1 ppm H₂O and O₂.
- ▪Shipments travel as UN1415 (lithium metal) or the applicable UN number for salts, under IATA/ADR dangerous-goods rules with declared packaging.
- ▪Never quench residues with water; use dry sand or a Class D extinguisher and dispose through a licensed reactive-metal route.
Frequently asked questions
Common questions from buyers specifying lithium at 99%.
- Is 99% lithium the right grade for my application?
- It is the usual choice for alloying, metallurgical additions. Above it, 99.9% (3N) is reserved for battery-grade metal, foil and salts.
- What does the 2N designation mean?
- The N notation counts the nines in the assay: 2N equals 99% Li on a metals basis, with the balance made up of the trace elements listed in the analysis table.
- Which impurities are measured and reported?
- ICP-OES assay plus oxygen determination is used, and a certificate of analysis reports each element in the table above, starting with Na at ≤ 0.5%. The scope of a scan can be widened to further elements when a process is sensitive to one in particular.
- How is this grade normally packed?
- Argon pouch, Sealed tin under oil, Drum (DG compliant). Shipments travel as UN1415 (lithium metal) or the applicable UN number for salts, under IATA/ADR dangerous-goods rules with declared packaging.
- Which forms is 99% lithium available in?
- Commonly: ingot, granules. The form is often a bigger practical constraint than the assay itself, because the last processing step has to preserve the purity already achieved.